These are shims to space between the kuckle on e36 and e46 with e36 front knuckle conversions.

In some racing classes you are not allowed adjustable camber plates or lower control arms and these are perfect for adding front camber.

For drifting you may want to add camber at the knuckle for a variety of reasons. Maybe you are using the top hat of the coilover for caster, or you want to add camber at the top hat and at the knuckle due to lack of adjustment at the top hat or to increase KPI at the knuckle for added weight jacking.

Kit Includes:

(4) 1/8” Aluminum Shims

(2) 1/16” Aluminum Shims

(4) Extended 10.9 Flange Bolts

Additional Shims:

Additional/spare shim set can be added to the kit. Includes (2) 1/8” & (2) 1/16” Shims

Customer will be responsible for suppling the correct length hardware if additional shims are added.

In order to run dual calipers for a hydraulic hand brake with an independent reservoir master cylinder, this bracket kit allows you to adapt 2 piston Z32 calipers to FD RX7 rear rotors.

Introductory Pricing - Sale will run until 6/19

Kit Includes:

Steel Conversation Brackets (Powder Coated Black)

1x Mounting Hardware Kit

Notes:

Customer is responsible for sourcing calipers and other remaining parts. See More

2-3 week lead time prior to shipping.

If you are swapping a 24V engine into your E30, this ECU bracket is a must for the cleanest installation. This bracket fits in the exact OEM location (glovebox) of your E30 but holds the 24V ECU from your E36/E34/E46/Z3/E39. This is the last touch to complete your swap.

*ECU NOT included*

NOTE: Will only fit M50, M52B25, M52B28, S50, S52 ECUs only. 

Note: Fits LHD or RHD vehicles.
*Note: You will need to use the stock screws to hold the bracket to your car. These will be same screws that came in your car. 

Kit Includes:

• 3 Piece Bracket - 3D Printed With ABS Plastic

• Hardware - Stainless Steel

Disclaimer: 3D printed items may contain small minor aesthetic defects. These defects will not reduce structure/strength and can be correct with light sanding if the consumer desires

Make installing a Link PNP ECU simple and clean.

Designed around the OEM ECU case mounting w/ provision for additional wiring, such as a expansion harness.

CAD designed and 3D printed in ABS with all required hardware for mounting ECU into casing.

*ECU NOT included*

Reference Links:

Link E36 PNP ECU

Disclaimer: 3D printed items may contain small minor aesthetic defects. These defects will not reduce structure/strength and can be correct with light sanding if the consumer desires

Seal up the hole in the firewall when removing the HVAC. Designed to bolt into the existing mounting studs on the E8X/E9X firewall. 

• Designed in CAD using 3d scan data for perfect fitment.

• Cut from .050” aluminum in house on our plasma table

• Finished with a bead roll for added rigidity.

Disclaimer: Panel does not include pass-through for factory wiring harness.

Designed to mount the E36 M5X motor series into your E8X/E9X RWD Chassis.

CAD designed and cut on a CNC plasma table and fabricated in-house.

Powder coated in texture black.

Engine Mounts

• Designed to be used oil pan BMW #11131740915 and corresponding pickup tube.

• Suggested to be used with solid motor mounts. Ex: Condor Motor Mounts

• Incorporated mounting for E36 PS. reservoir.

Transmission Mount

• Transmission mount available for mounting the ZF 5 speed into rwd chassis.

For additional information, please visit E92 M5X Engine Swap Mounts.

Disclaimer: Will not work stock style exhaust manifolds, designed turbo style manifolds in mind.

Notes from 10-25-24: Limited Stock, May be 2-3 Week Lead Time

By customer request, it was brought to my attention there wasn’t an OEM or aftermarket front license plate filler panel available. This delete panel is 3D printed with high quality PETG filament including (4) removable/replaceable clips.

Along with the delete panel and clips, an additional (4) replacement clips will be provided. The original trim piece is to be provided by the consumer (BMW #51111855951).

Filler Panels are made to order. Please allow 7-10 days prior to shipment.

Disclaimer: 3D printed items may contain small minor aesthetic defects. These defects will not reduce the structure/strength and can be corrected with light sanding if the consumer desires.

Inspired from Euro E36 M3 coolant expansion tank location, this bracket allows the coolant expansion tank to be directly bolted in.

OBD1 Cars: To use this relocation kit, the power block will have to be relocated. Coolant level sensor wiring will have to be extended or disabled.

OBD2 Cars: To use this relocation kit, the secondary air pump will have to be deleted. Coolant level sensor wiring will have to be extended or disabled.

Kit Includes:

1x Steel Conversation Bracket (Coated Black)

1x Expansion Tank BMW #17111712641 modified with m6x1.00 nutserts in mounting locations (Cap and level sensor not included)

1x Mounting Hardware Kit

Notes:

Customer will be responsible for relocating connecting coolant lines.

For the coolant line under the intake, the ideal routing location is behind the cylinder head along the firewall. (See photos for reference) This is done by a series of hoses sections combined together.

For the coolant line from the radiator to tank, BMW #17112227482 is the hose originally designed for the euro E36 M3.

Bundled together for a limited time!

The kit contains:

- 1x M5X Spring Compressor Tool Click Here For More Info!

- 1x M5X Cylinder Head Block Off Plates Click Here For More Info!

Make installing a digital dash simple and clean.

Available in a blank or configured for a 7” Powertuned V5 Dash. Please contact bubbabuiltdesigns@gmail.com to inquire about other dash options.

CAD designed and 3D printed in ABS to fit firmly within the OEM dashboard using the (2) original mounting screws.

*Digital dash & hardware NOT included*

Reference Links:

7” Powertune V5 Digital Dash

Made to order. Please allow 5-7 days prior to shipment.

Disclaimer: 3D printed items may contain small minor aesthetic defects. These defects will not reduce structure/strength and can be correct with light sanding if the consumer desires